Corrugated Sidewall Belt
Corrugated sidewall conveyor belt is considered as one of the most effective way of elevating materials. Our Corrugated Sidewall belt is specially engineered to operate in the most demanding conditions and handle the most aggressive materials. We use the very best rubber compound to provide an extended operational lifetime.
The advantage of Sidewall belt
- Maximum utilisation of space
- Minimum maintenance, long belt life
- Wide range of materials can be handled
- No transfer points, no spillage with steep angle conveying
- Low Power requirement, quiet smooth running.
Sidewall belts require a certain tensile strength and abrasion resistance. For belt with lateral free space, the belt must have enough corss rigidity transversely and Flexibility longitudinally to meet up with the requirement of deflection part of conveyor. The special designed base belt with cross rigidity solved the problem of belt collapse.
We have wide range of rubber compounds to meet various requirement for all sorts of material handling.
|General Use||RMAI, RMAII, DIN22102 Z&Y, AS1332: N; SANS 1173 N||For general application|
|Good Abrasion Resistant||DIN22102 X; AS1332 M, SANS 1173: M;||For high tension application|
|Super Abrasion Resistant||DIN22102 W; AS1332 A, SANS 1173: A;||For very harsh conveying or large size sharp material application|
|Heat Resistant 120° C||ISO standard||Heat Resistant application up to 120° C|
|Heat Resistant 150° C||Heat Resistant application up to 150° C|
|Heat Resistant 180° C||Heat Resistant application up to 180° C|
|Super Heat Resistant 400° C||Heat Resistant application up to 400° C for short time|
|Oil Resistant||To conveyor materials containing with oil|
|Chemical Resistant||Chemical industrial, ocid resistant|
|Cold Resistant||Very cold condition up to -45° C|
|Flame Resistant||DINK/ ISO 340||Electrical resistance and flame resistant mining|
Our sidewalls and cleats are bonded to base belt by hot vulcanising. This ensures the highest adhesion strength.
|Bonding method||Traditional Cold Bonding||Hot Vulcanising Bonding|
|Adhesion Strength||≤10 N/mm||≥20 N/mm|
Our Sidewall design ensure maximum flexibility, the profile has excellent vertical stability for load retention and return side support.
The design allows for high compression to ensure smooth inner deflection around small radius.
Our Sidewall (over 120mm height) has special diagonal fabric reinforcement as follows.
Our Cleats are designed with good features of impact resistant and hardness to avoid cleat distortion.
The shape of C and TC type have been created to offer best conveying capacities along with self-cleaning properties.The smaller profile cleat are extruded, all large cleats are moulded to give the best shape retention even when coneyong high density materials.
C,TC and TCS are normally used for conveyor angle over 40°, T type is used for angle less than 40°
|Type||Height（mm）||SW（mm）||Min Pulley Diameter（mm）|
Our cleats from 110mm and higher have special fabric reinforcement in the vertical and angle parts.
To avoid materials leak from the gap between cleats and sidewalls, the cleats should be positioned to the right sidewall corrugation for screwing reinforcement.
Saft & Humanized packing method is very important to protect sidewall belt.